Polyaspartic is the coating the pros switched to: it cures in hours instead of days, never yellows in the sun, flexes with freeze-thaw movement and laughs at hot tires. It's the topcoat on every SwiftHand floor.
Polyaspartic is a type of aliphatic polyurea — a resin chemistry developed for bridge decks and industrial floors that need to go back into service fast and take abuse for decades. On a residential garage floor it does three things epoxy can't: it cures in a few hours so you're parking in about two days, it stays perfectly clear in sunlight, and it keeps enough flexibility to move with a Utah slab that swings 60 degrees between January and July.
Because it cures fast and tolerates cold, we can install polyaspartic floors year-round along the Wasatch Front and in the mountain towns — Park City, Heber, Eden — where an epoxy floor would never cure in a cold garage. That's why polyaspartic is the topcoat on every system we install, from a full-flake garage to a metallic basement.
We pair it with a polyurea base coat, which wets deeper into ground concrete than polyaspartic alone. Base coat bonds; topcoat protects. It's the same two-part logic we use on cabinets: primer for adhesion, finish for durability.
Foot traffic the same evening, vehicles in about two days. An epoxy floor typically needs five to seven days before you park.
Aliphatic chemistry means the clear coat stays clear. West-facing garages, sunrooms and patios all stay true to color.
Polyaspartic keeps more elongation than rigid epoxy, so it moves with the slab instead of cracking or delaminating at the joints.
Cures at temperatures epoxy can't, which keeps our schedule open from Tooele to Park City all winter.
Higher solids and better abrasion resistance mean a topcoat that wears longer under tires, tool boxes and dog nails.
Gas, oil, brake fluid, coolant, de-icer and fertilizer wipe up without staining when cleaned promptly.
| Layer | What it does |
|---|---|
| Polyurea base coat | Maximum penetration into diamond-ground concrete; carries the base pigment. |
| Decorative layer | Full-flake vinyl chip, quartz, metallic pigment or solid color depending on the look you choose. |
| Polyaspartic topcoat | Clear, UV-stable, fast-cure wear layer with an anti-slip additive. |
Every SwiftHand floor follows the same sequence. Skipping a step is how coatings fail, so we don't.
Measure the space, check the slab for moisture and old coatings, pick a finish. You get a written price — online in minutes or in person.
We grind the concrete with dust-controlled diamond grinders to open the pores. Never acid etching, which is why our floors don't peel.
Cracks, pits, spalls and control joints are filled with polyurea joint filler and mender, then ground flush. Moisture is tested before anything goes down.
A pigmented polyurea/polyaspartic base coat is rolled on and wets into the ground concrete for a mechanical bond.
Vinyl flake is broadcast to full rejection (or metallic, quartz or solid color applied), then scraped smooth once set.
A clear polyaspartic topcoat locks it all in — chemical, UV and hot-tire resistant. Walk on it that evening; park on it in about 48 hours.
Polyaspartic systems price the same as our standard garage floor system because they are our standard system: roughly $5–$9 per square foot installed for a full-flake floor, with size, repair work and finish driving the exact number. There's no upcharge to get polyaspartic instead of epoxy at SwiftHand.
Financing: 0% APR for up to 12 months and $0 down through Wisetack on approved credit — a $3,000 floor is $250 a month, interest-free. Financing details.
Representative photos of the systems on this page. Photos of SwiftHand projects are added as jobs complete.
For a garage in Utah, yes, and it isn't close. Epoxy is a fine industrial product indoors in a stable climate, but it yellows under UV, cures slowly in the cold, and turns brittle when the slab moves. Polyaspartic solves all three. The one place epoxy still wins is cost on a bare, unfinished warehouse floor that never sees sun — and we can install that too. Full comparison here.
Polyaspartic is a specific kind of polyurea (an aliphatic polyurea). The 'polyurea' floors advertised by one-day franchises are usually a polyurea base with a polyaspartic top, which is exactly what we install. The difference is in the prep and the flake coverage, not the chemistry. Polyurea vs. polyaspartic explained.
Only after the old epoxy is ground off. Polyaspartic bonds to concrete, not to a failing coating, so we remove whatever is there first. It's included in your quote.
There's a solvent odor during application that clears within a few hours with the garage door open. It's far less than a solvent epoxy and nothing lingers once it cures.
A full-flake polyaspartic system finishes around 25–35 mils — several times thicker than a DIY kit — and the flake layer adds a texture that hides minor slab imperfections.
Answer a few questions about the space — size, condition, the finish you like — and our instant quote tool builds a written price on the spot. It takes four to five minutes, not sixty seconds, because an accurate number beats a fast one. Prefer a person? Book a free consultation and we'll measure in person.
Get an instant online price in a few minutes, or book a free in-person consultation. No pressure, no sleazy sales pitch — just a written price.
