One color, edge to edge. Solid color floors are the choice for workshops, warehouses, utility rooms and homeowners who want a clean, modern garage that shows exactly where the dropped bolt is.
A solid color floor is the same prep and the same polyurea-plus-polyaspartic system as our flake floors, minus the flake. What you get is a uniform, seamless surface in whatever color you like — light gray to bounce light around a shop, tan to hide dust, a deep charcoal for a modern look, or a custom color to match a company brand or a favorite car.
Because there's no flake to hide anything, prep matters even more; every pit and crack shows through a solid floor unless it's filled and ground flush. We add a fine anti-slip aggregate to every solid topcoat by default, and we can lay out striping, safety lines and logos for commercial floors.
Solid color is a little less expensive than flake and is the standard for warehouses, utility rooms, and homeowners who want minimal. It shows dirt and tire marks more than flake does — that's the trade-off, and we'll tell you so.
Standard grays and tans, or a custom match to a brand or vehicle.
Light solid colors reflect the most light in a shop or warehouse.
No texture to catch debris; a push broom and a squeegee do it all.
Less material and labor than flake, quartz or metallic.
Safety lines, parking bays and logos can be applied between coats.
Same 15-Year transferable warranty as every SwiftHand residential floor.
Every SwiftHand floor follows the same sequence. Skipping a step is how coatings fail, so we don't.
Measure the space, check the slab for moisture and old coatings, pick a finish. You get a written price — online in minutes or in person.
We grind the concrete with dust-controlled diamond grinders to open the pores. Never acid etching, which is why our floors don't peel.
Cracks, pits, spalls and control joints are filled with polyurea joint filler and mender, then ground flush. Moisture is tested before anything goes down.
A pigmented polyurea/polyaspartic base coat is rolled on and wets into the ground concrete for a mechanical bond.
Vinyl flake is broadcast to full rejection (or metallic, quartz or solid color applied), then scraped smooth once set.
A clear polyaspartic topcoat locks it all in — chemical, UV and hot-tire resistant. Walk on it that evening; park on it in about 48 hours.
Solid color floors usually run $4–$7 per square foot installed. Extra topcoats, striping or logos add to the price. Instant quote handles solid color directly.
Financing: 0% APR for up to 12 months and $0 down through Wisetack on approved credit — a $3,000 floor is $250 a month, interest-free. Financing details.
Representative photos of the systems on this page. Photos of SwiftHand projects are added as jobs complete.
More than flake does. Lighter grays and tans hide marks best; dark charcoal shows the most. Tire marks clean off with a degreaser.
Not with the anti-slip aggregate we add to every topcoat. Gloss without aggregate can be slick when wet, so we don't install it that way.
Yes. We can tint to most standard color systems and match a paint chip or brand color.
Yes — yellow safety lines, parking bays, walkways and logos are common on commercial and shop floors.
Answer a few questions about the space — size, condition, the finish you like — and our instant quote tool builds a written price on the spot. It takes four to five minutes, not sixty seconds, because an accurate number beats a fast one. Prefer a person? Book a free consultation and we'll measure in person.
Get an instant online price in a few minutes, or book a free in-person consultation. No pressure, no sleazy sales pitch — just a written price.
