Serving Salt Lake, Utah, Davis, Weber, Summit, Wasatch, Tooele & Morgan countiesSister company of SwiftHand Painting · 801-895-3794
Serving Draper · Salt Lake County

Polyaspartic & Epoxy Floors for Draper Homes

We coat garage, basement and patio floors throughout Draper with the system built for northern Utah: diamond grinding, polyurea repair, full flake and a UV-stable polyaspartic topcoat. SunCrest and Traverse Ridge garages take a brutal salt-and-snowmelt load from the steep plowed access roads, making a durable, chemical-resistant floor coating a practical necessity.

Licensed & insured in UtahOwner-run, sister company of SwiftHand Painting15-Year transferable warrantyDiamond-ground prep, never acid etchServing 130+ northern Utah communities
About working in Draper

Concrete coatings for Draper homes and businesses

Corner Canyon's trail network starts practically at the back fence for anyone above 1300 East, and mountain bikers fill the trailheads from March through October. SunCrest sits high enough on Traverse Ridge that residents often drive down out of the clouds, and the Point of the Mountain is where paragliders launch over the freeway all summer.

SwiftHand Concrete Coatings is the coatings arm of SwiftHand Painting, an owner-run Salt Lake County company, and Draper is squarely inside our everyday service area — not a place we drive to twice a year. The same crew that grinds and coats in Sandy and Riverton is the crew that shows up on your driveway.

Draper, Salt Lake County
Draper, Salt Lake County
A coated garage — representative photo
A coated garage — representative photo
Salt LakeCounty
4,751 ftElevation
~51,017Residents
84020ZIP codes
1 day typicalInstall
Local conditions

Why Draper garages need a real coating

Draper climbs from about 4,750 feet in town to well over 6,000 feet at SunCrest on Traverse Ridge, so the upper neighborhoods get substantially more snow, harder freezes and longer plow seasons than the valley floor. Traverse Ridge Road and the Point of the Mountain corridor are salted aggressively and the ridge sees strong sustained winds.

Heavily 1998-2015 construction with large custom homes on the benches at South Mountain, SunCrest and Traverse Hills, plus a smaller historic core near 12300 South. Three-car garages are standard on the hillside builds and many include RV or workshop bays.

Valley-floor slabs like Draper's spend the winter in a constant freeze-thaw cycle just a few degrees either side of 32°F, which is the worst possible range for bare concrete. Add the salt that comes home on the tires and pitting is a matter of when, not if. A non-porous polyaspartic floor ends the cycle.

Salt damage & scaling Polyaspartic vs. epoxy

Everywhere in town

Neighborhoods we serve in Draper

SunCrestCorner CanyonSouth MountainDraper HeightsTraverse HillsDraper Historic District

Whether you're near Corner Canyon Regional Park or out by Draper Amphitheater, Draper is on our regular route. Every neighborhood, every ZIP.

Process

How an install goes in Draper

We route Draper with Sandy and Riverton, so scheduling is usually within a couple of weeks. A standard two- or three-car garage is a single day on site; basements and shops are sized in the quote.

Written price

Instant quote online or a free consultation at your Draper home.

Diamond grind

Dust-controlled; never acid etch.

Repair & moisture test

Polyurea mender; vapor test on every slab.

Base, flake, topcoat

Polyurea base, full flake, UV-stable polyaspartic.

Walkthrough

Crew lead and you, before we leave.

Full process →

Pricing

What a garage floor costs in Draper

Most Draper garages land between $1,800 and $4,500 installed — roughly $5–$9 per square foot for a full-flake polyaspartic system, with slab repair, old-coating removal and premium finishes moving the number. Basements often price lower per foot; metallics and quartz price higher. The instant quote builds a written price for your actual square footage in about five minutes.

Instant online pricing

Price your Draper floor in about five minutes

Answer a few questions about the space — size, condition, the finish you like — and our instant quote tool builds a written price on the spot. It takes four to five minutes, not sixty seconds, because an accurate number beats a fast one. Prefer a person? Book a free consultation and we'll measure in person.

Book a free consultation instead

FAQ

Draper questions

How much does a garage floor coating cost in Draper?

Most Draper garages run $1,800–$4,500 installed for a full-flake polyaspartic floor — about $5–$9 per square foot depending on size, slab condition and finish. Get an instant written price or read the cost guide.

Do you serve Sandy and Riverton too?

Yes — Sandy, Riverton and every community in Salt Lake County are on our regular route. All service areas.

My Draper garage slab is pitted and cracked. Can it still be coated?

Almost always. We grind to sound concrete, fill cracks and pits with flexible polyurea mender, and coat over the repairs so they disappear under a full-flake floor. Repair is included in the quote. Cracked and pitted concrete.

How long does a coated floor last in Draper?

A properly ground and installed polyaspartic floor should last 15–20+ years here, and it carries our 15-Year transferable warranty against peeling, delamination, hot-tire pickup and yellowing. Warranty terms.

Do you do basements and patios in Draper, or just garages?

All of it — garages, basements, patios, porches, pool decks, steps, shops and commercial floors. SunCrest and Traverse Ridge garages take a brutal salt-and-snowmelt load from the steep plowed access roads, making a durable, chemical-resistant floor coating a practical necessity.

Ready for a Draper floor you never think about again?

Instant online price in about five minutes, or a free consultation at your home. Call or text 801-895-3794.