Peeling, pitting, salt scaling, dust, moisture, hot-tire pickup, a floor that yellowed, a one-day install that didn't last. Each one has a cause and a fix, and we've done all of them more times than we can count.
Strips lifting along the tire lines, bubbles at the door, chips coming up with the broom. A peeling coating isn't bad luck; it's a prep or product failure, and it's fixable — once the old floor comes off.
How we fix it →
Hairline shrinkage cracks, pop-outs, pitting along the tire lines, a spalled apron at the door. Nearly all of it can be repaired flush and hidden under a full-flake floor. Here's how — and the honest limits.
How we fix it →
You sweep, and there's more. Gray dust on the cars, on the storage bins, tracked into the house. Bare concrete sheds its surface forever; sealing or coating it ends the problem the same day.
How we fix it →
White salt bloom along the tire lines, a surface that's flaking off in sheets, pits that fill with brine every February. Utah's de-icers are brutal on bare concrete. A coated slab doesn't absorb them.
How we fix it →
Four clean rectangles of bare concrete, one under each tire, with the coating stuck to the tread. That's hot-tire pickup, and it happens to thin, under-bonded coatings every July along the Wasatch Front.
How we fix it →
The floor was crisp gray with white flake. Now it's beige, and worse near the door. That's UV amber, and every epoxy clear coat does it under Utah sun. The fix is chemistry, not cleaning.
How we fix it →
Snowy boots on a glossy floor is a trip to the ER waiting to happen. Slip resistance isn't an option on a Utah floor; it's part of the system, and it can be added to a slick floor you already have.
How we fix it →No judgment: the box said 'clean and etch,' you did, and now it's coming up in sheets. We grind off DIY kits every week. Here's why it failed, what removal involves, and what goes down instead.
How we fix it →
It went in fast, it looked great for a year, and now it's bubbling at the door and thin along the walls. The chemistry was probably fine. The prep and the coverage weren't. We can fix it — and we'll show you what was skipped.
How we fix it →
White powder on the slab, a coating that bubbled from underneath, a basement floor that sweats every April. Moisture vapor is the one thing a coating can't outmuscle — it has to be measured and managed first.
How we fix it →
It's the biggest room in the house and the only one that's still bare concrete and drywall. A finished floor changes the whole space, and with the door painted and the gear on the wall, it becomes a room you use.
How we fix it →Answer a few questions about the space — size, condition, the finish you like — and our instant quote tool builds a written price on the spot. It takes four to five minutes, not sixty seconds, because an accurate number beats a fast one. Prefer a person? Book a free consultation and we'll measure in person.
Send a photo or book a free look. We'll tell you what happened and what it takes to fix it — even if the answer is 'leave it alone.'
